Pumping Element  -  1R / 2R

Pumping Element  -  11R  / 12R

Commissioning of Pumps

Pumping Element Assembly for 1R / 2R.  
Oil immersed type, open execution, face mounting, valve controlled, fixed delivery. 

Pumping element for 11R / 12R series pumps.
Oil immersed type, open execution, face mounting, valve controlled, fixed delivery. 

Commissioning of Pumps Model:  
2RC / 2RCE and 12RC / 12RCE

Rugged low cost pumps with all parts renewable by replacement. Oil immersed type, open execution, face mounting, valve controlled, fixed delivery, bi-directional rotation of shaft.  For coupling the pumps to the electric motors standard bell housing assemblies are available.  available with two pumping elements. (Please see datasheet for additional details).

Rugged low cost pumps with all parts renewable by replacement. Oil immersed type, open execution, face mounting, valve controlled, fixed delivery, bi-directional rotation of shaft. For coupling the pumps to the electric motors standard bell housing assemblies are available. Available with three pumping elements. (Please see datasheet for additional details).

Rugged low cost pumps with all parts renewable by replacement. Radial piston arrangement, with 3, 5 or 7 pumping elements. Oil immersed type, open execution, face mounting, valve controlled, fixed delivery, bi-directional rotation of shaft. Also available with extension shaft / bracket for through drive. For coupling the pumps to the electric motors standard bell housing assemblies are available. These are also available with extension shaft to couple low pressure pumps. (Please see datasheet for additional details).

Radial piston arrangement, with 3, 5 or 7 pumping elements. external mounting type. Face mounting, Valve controlled, Fixed delivery. Bi-directional rotation of shaft. Available with extension shaft for through drive. With extension bracket assembly for coupling a low pressure pump having standard flange. (Please see datasheet for additional details).

Radial piston arrangement, with 3, 5 or 7 Pumping elements each per pump section. Fixed delivery, Oil immersed type, Open execution, face mounting, Valve controlled. Bi-directional rotation of shaft.

Flows can be combined internally, externally to feed one circuit or used independently to feed Two circuits. (Please see datasheet for additional details).

Radial piston arrangement, with 3, 5 or 7 pumping elements. External mounting type. Face mounting, Valve controlled, Fixed delivery. Bi-directional rotation of shaft. Available with extension shaft for through drive. With extension bracket assembly for coupling a low pressure pump having standard flange.

Flows can be combined internally, externally to feed one circuit or used independently to feed Two circuits. (Please see datasheet for additional details).

Radial piston arrangement, with 5 or 7 pumping elements. Oil immersed face mounting. Valve controlled. Fixed delivery. Bi-directional rotation of shaft. With extension shaft for through drive. Available with extension bracket assembly for coupling a low pressure pump having standard flange. (Please see datasheet for additional details).

Radial piston arrangement, with  5 or 7 pumping elements. External mounting type. Face mounting, Valve controlled, Fixed delivery. Bi-directional rotation of shaft. Available with extension shaft for through drive. With extension bracket assembly for coupling a low pressure pump having standard flange. (Please see datasheet for additional details).

Radial piston arrangement, with  5 or 7 pumping elements each per pump section. Oil immersed face mounting. Valve controlled. Fixed delivery. Bi-directional rotation of shaft. With extension shaft for through drive. Available with extension bracket assembly for coupling a low pressure pump having standard flange. (Please see datasheet for additional details).

Radial piston arrangement, with  5 or 7 pumping elements each per pump section. External mounting type. Face mounting, Valve controlled, Fixed delivery. Bi-directional rotation of shaft. Available with extension shaft for through drive. With extension bracket assembly for coupling a low pressure pump having standard flange. (Please see datasheet for additional details).

The bell housing series BH are designed for coupling hydraulic pumps having ISO flanges to electric motors having metric flanges.
The correct alignment of the shafts along with the cushioned power transmission through a resilient spider increases the life of the bearings of the pump/motor coupled.

The bell housing series BHP are designed for coupling hydraulic pumps having flanges to electric motors having metric flanges. These bell housings are precisely machined to reduce misalignment of coupled shafts. The correct alignment of the shafts along with the cushioned power transmission through a resilient spider increases the life of the bearings of the pump/motor coupled. The construction also reduces the noise generation considerably.

The bell housing series EB are designed for coupling hydraulic pumps having ISO flanges to electric motors having metric flanges. These bell housing are precisely machined to reduce misalignment of coupled shafts. The correct alignment of the shafts along with the cushioned power transmission through a resilient spider increases the life of the bearings of the pump/motor coupled. The construction also reduces the noise generation considerably.

Hand Pumps  -  HP12 & HP16

Heavy duty construction. Renewable internal parts by replacement. Integral Relief and Release valves. Collapsible hand movement at low pressure. (Please see datasheet for additional details).

Hand pump model HP*-D are compact heavy duty pumps designed for industrial applications like operating small presses, fixtures as well as providing source of oil for hydraulically operated emergency equipments. These hand pumps are equipped with integral Rotary Directional Control Valve with two outlet ports for switching of the flow between the two sides of a double acting cylinder. The Rotary valve has pressure holding ability.

Hand pumps series HPTS** are identical in specifications to series HP** pumps, except that, these pumps are meant for mounting on the side wall of oil reservoir / tank of a hydraulic system and therefore can be integrated into the main system as a stand-by pump or can be used as a power source for cylinders or jacks which need large volume of oil for their actuation by mounting them on side wall of suitably designed oil tank. (Please see datasheet for additional details).

Automatic change-over from high discharge at low pressure to low discharge at high pressure. Renewable internal parts by replacement. Collapsible Hand lever for compact size and short hand movement. (Please see datasheet for additional details).

FEED AND POWER HAND PUMP Model : HP5012**D / HP5016**D

These hand pumps are provided with integrated Rotary Directional Control Valves with two outlet ports for switching of the hand pump power between the two sides of a double acting cylinder. (Please see datasheet for additional details).

Automatic change-over from high discharge at low pressure to low discharge at high pressure. Renewable internal parts by replacement. Collapsible Hand lever for compact size and short hand movement. (Please see datasheet for additional details).